flyPad Settings
Defaults
Settings for various default values of the aircraft.
Usage
- Thrust Reduction Height (ft):
- Default for the MCDU setting for thrust reduction height (above ground).
- Acceleration Height (ft):
- Default for the MCDU setting for acceleration height (above ground).
- Engine-Out Acceleration Height (ft):
- Default for the MCDU setting for engine-out acceleration height (above ground).
Aircraft Configuration
Settings for A32NX aircraft configuration.
Usage
- Weight Unit:
- The weight unit of the aircraft used for aircraft weight, fuel and simBrief imports.
- PAX Signs:
- Configures if the aircraft should use "No Smoking" or "No Portable Devices" in its ECAM message when the no smoking selector switch on the overhead panel is selected on.
- ISIS Baro Unit
- User can set which baro setting he wants to have in the ISIS backup instrument.
- ISIS Metric Altitude
- User can set which units setting he wants to have in the ISIS backup instrument.
-
RMP VHF Spacing
- Changes the spacing for selectable frequencies in the RMPs from 8.33kHz to 25kHz and vice versa.
Channel Spacing (click to expand)
Aircraft radio systems transmit on a Very High Frequency (VHF) band between 117.975 and 137 MHz. The number of available VHF assignments has increased over the years by splitting the radio spectrum into narrower bandwidths from 50-kHz to 25-kHz channels. The bandwidth can support 760 channels, if channels are spaced by 25 kHz. In 1994, it was decided to introduce a further channel split from 25 to 8.33 kHz. 8.33-kHz spacing was introduced above Flight Level (FL) 240 in International Civil Aviation Organization (ICAO) European (EUR) regions in October 1999 and above FL 195 from March 15, 2007. Currently, 8.33-kHz channels have been implemented in the airspace of all 20 ICAO EUR region states. So far, Europe is the only region that’s moved to 8.33-kHz channel spacing.
Source: universalweather.com
Sim Options
Settings for simulation aspects of the A32NX aircraft.
Usage
- Default Baro:
- User can set which baro setting he wants to have as a default: inHg, hPA or Auto (depends on the airport where the aircraft spawned).
- Sync MSFS Flight Plan:
- User can set if and how the flight plan synchronization between the simulator and the aircraft should work.
-
The options are:
- None: No synchronization.
- Load Only: Only once when loading the flight.
- Save: Synchronization with every change in the aircraft
Synchronization Issues Expected
The aircraft's custom Flight Management System provides better accuracy and features over the default flight plan manager in Microsoft Flight simulator which results in issues syncing the flight plan from the MCDU back into the simulator. Do not expect it to work properly in all cases.
- Dynamic Registration Decal:
- The dynamic registration number decal shown on the external livery can be disabled to improve appearance when using liveries with a static registration number.
- External MCDU Server Port
- User can change the port for the internal MCDU websocket server in case the default port is already occupied on the user's system.
- Default is: 8380
This is not the port for using in the browser to access the MCDU Web Interface.
- Use calculated ILS signals
- Enable this setting to use a calculated ILS signal instead of the signal provided by Microsoft Flight Simulator.
- This avoids unwanted and unrealistic loss of the ILS signal in Microsoft Flight Simulator which often happens when the aircraft gets below the antenna position.
- In some rare cases this can cause a faulty G/S signal. In this case this setting can be disabled with immediate effect.
- Detents
Realism
Settings for realism aspects of the A32NX aircraft.
Usage
- ADIRS Align Time:
- User can set this to either a realistic time (~8min), a faster time (~2min) or instant.
- DMC Self Test Time:
- User can set the time for the Display Management Computer's self test (Real ~15sec, Fast ~5sec, Instant).
- Boarding Time:
- User can set the simulated boarding time to either a realistic time (~15min), a faster time (~3-4min), or instant.
- Based on full load - 174 passengers and full cargo.
- User can set the simulated boarding time to either a realistic time (~15min), a faster time (~3-4min), or instant.
- MCDU Keyboard Input (unrealistic)
- Enables the MCDU Keyboard input feature (see MCDU Keyboard).
- MCDU Focus Timeout (s)
- The timeout feature will "automatically unfocus" the MCDU screen after the given amount of seconds.
- Valid range is 5 - 120 seconds.
- Separate Tiller from Rudder Inputs
- User can chose to use how the nose wheel shall be controlled:
- Legacy mode (Disabled): Rudder controls also move the nose wheel. No separation.
- Realistic mode (Enabled): Nose Wheel steering with tiller handwheel is separate from the rudder.
- See our guide: Nose Wheel and Tiller Operation
- User can chose to use how the nose wheel shall be controlled:
- Home Cockpit Mode
- Removes backlight bleed from PFD, ND, and ECAMs
- Removes reflection from the ISIS
- DATALINK transmission time
- Instant: sends and receives messages within two seconds
- Fast: sends and receives messages within twenty seconds
- Real: sends and receives messages within sixty seconds
- See Hoppie ACARS
ATSU/AOC
Settings for integrations with various data and information sources.
Usage
- ATIS/ATC Source:
- Choose which Online ATC service should be used for ATIS and ATC.
- METAR Source:
- Choose which weather data provider should be used (MCDU only - does not change sim weather).
- MeteoBlue is the weather service the sim uses as well.
- TAF Source:
- Choose which Terminal Area Forecast (TAF) service should be used.
-
TELEX:
-
Enables free text and live map (FlyByWire Live Map).
Warning
If enabled, aircraft position data is published for the duration of the flight. Messages are public and not moderated.
USE AT YOUR OWN RISK -
If enabled a message will be displayed to confirm sharing of the free text and position data to the public.
-
-
Error Reporting
- Enables error reports to be sent to Sentry.io to allow the FlyByWire team to easier find and fix issues with the aircraft.
- Simbrief Username/Pilot ID
- See next chapter
- Hoppie User ID:
- Unique logon code that is used to identify the user for the Hoppie ACARS communication.
- See Create a logon code in our documentation for Hoppie ACARS.
simBrief Integration
Before you can use the A32NX simBrief Integration you need to provide your simBrief account details.
-
Simbrief Username/Pilot ID:
-
Enter your simBrief username or Pilot ID.
-
If you entered a wrong username or Pilot ID a red error message will be displayed.
-
To get your simBrief username or Pilot ID you can go to your simBrief Account settings and open "Simbrief Data".
If you use the Stable version please omit any space characters in your username. If for example your username is "Mr Pilot" the please use "MrPilot" as username.
Also the Stable version does only allow the username to be entered here, not the Pilot ID.
Audio
Settings for various audio sources and sounds.
-
PTU Audible in Cockpit (unrealistic):
- Allows the PTU to be heard in the cockpit which in real life is not the case. But many people are used to this sound as it is very audible in the passenger cabin.
-
Exterior Master Volume:
- Volume for sounds audible when in external views.
-
Engine Interiors Sounds:
- Volume for engine sounds when in interior views.
-
Wind Interior Volume:
- Volume for wind sounds when in interior views.
-
Passenger Ambience
- If this setting is enabled the following ambience sounds are played:
- Boarding sound begins when the W/B in
MCDU-ATSU-AOC-W&Bboarding is started. - Once passengers are on the plane, a constant passenger ambience sound plays.
- Deboarding through the the W/B section in
MCDU-ATSU-AO-W&Btriggers the deboarding sound.
- Boarding sound begins when the W/B in
- If this setting is enabled the following ambience sounds are played:
-
Announcements
- If this setting is enabled the following crew announcements are played:
- When boarding is finished, the flight attendant says "boarding completed."
- 30 seconds after "boarding completed", the captain makes a "welcome on board" announcement.
- Beacon light triggers the FA "arm doors" announcement
- 30 seconds after the "arm doors" announcement a safety demo is played.
- The cabin ready trigger triggers the "prepare for takeoff announcement." (engines must be running)
- 30 seconds after entering Cruise Phase the captain makes a cruise announcement.
- 30 seconds after entering Descent Phase the captain makes a descent announcement.
- Cabin ready and being in Approach Phase phase activates the prepare for landing announcement.
- Being in the Done Phase (after landing) and deactivating beacon light triggers the disarm doors announcement.
- If this setting is enabled the following crew announcements are played:
-
Boarding Music
- If enabled music will be playing during boarding.
flyPad Settings
Settings for the flyPad itself.
Usage
- Brightness:
- Manually set brightness of the flyPad
- Auto Brightness:
- Sets the brightness of the flyPad automatically based on the time of day.
- Colored Metar:
- Enable or disable the colored raw METAR on the flyPad Dashboard.
Throttle Configuration
Please see the Throttle Configuration Guide on how to use this page.
